YOUR INVESTMENT WITH PRACTICETORRENT JN0-335 SECURITY, SPECIALIST (JNCIS-SEC) PRACTICE TEST IS SECURED

Your Investment with PracticeTorrent JN0-335 Security, Specialist (JNCIS-SEC) Practice Test is Secured

Your Investment with PracticeTorrent JN0-335 Security, Specialist (JNCIS-SEC) Practice Test is Secured

Blog Article

Tags: Test JN0-335 Result, Latest JN0-335 Exam Simulator, Trustworthy JN0-335 Exam Content, JN0-335 Questions Exam, JN0-335 Pass4sure Pass Guide

P.S. Free & New JN0-335 dumps are available on Google Drive shared by PracticeTorrent: https://drive.google.com/open?id=1oOEhpAsesM8O-eNLlPT7XNYBRjHDT2fx

The high pass rate of our JN0-335 exam guide is not only a reflection of the quality of our learning materials, but also shows the professionalism and authority of our expert team on JN0-335 practice engine. Therefore, we have the absolute confidence to provide you with a guarantee: as long as you use our JN0-335 Learning Materials to review, you can certainly pass the exam, and if you do not pass the JN0-335 exam, we will provide you with a full refund.

Juniper JN0-335 (Security, Specialist (JNCIS-SEC)) certification exam is designed for individuals who have a basic understanding of security technologies and Juniper Networks security appliances. Security, Specialist (JNCIS-SEC) certification exam validates the candidate's knowledge and skills in implementing Juniper Networks security technologies. JN0-335 Exam covers a wide range of security technologies, including firewalls, virtual private networks (VPNs), intrusion detection and prevention (IDP), security policies, application security, and Junos security features.

>> Test JN0-335 Result <<

Latest JN0-335 Exam Simulator | Trustworthy JN0-335 Exam Content

I believe that after you use our JN0-335 study materials for a while, we will understand why we have a 99% pass rate. Our company has been pursuing the quality of our products. And our professional experts are the most specialized people in this career to help us pass the JN0-335 Exam. They have studied and done reseach on the design of our JN0-335 practice guide for over ten years. So every detail of our JN0-335 exam questions is perfect.

Juniper Security, Specialist (JNCIS-SEC) Sample Questions (Q95-Q100):

NEW QUESTION # 95
You want to support reth LAG interfaces on a chassis cluster.
What must be enabled on the interconnecting switch to accomplish this task?

  • A. 802.3ad
  • B. RSTP
  • C. swfab
  • D. LLDP

Answer: A


NEW QUESTION # 96
Which two statements describe JSA? (Choose two.)

  • A. JSA events must be manually imported into Security Directory using an SSH connection.
  • B. JSA can be used as a log node with Security Director or as a standalone solution.
  • C. JSA supports events and flows from Junos devices, including third-party devices.
  • D. Security Director must be used to view third-party events rom JSA flow collectors.

Answer: B,C


NEW QUESTION # 97
What is the correct step sequence used when Sky ATP analyzes a file?

  • A. static analysis -> cache lookup -> antivirus scanning -> dynamic analysis
  • B. cache lookup -> antivirus scanning -> static analysis -> dynamic analysis
  • C. dynamic analysis -> static analysis -> antivirus scanning -> cache lookup
  • D. cache lookup -> static analysis -> antivirus scanning -> dynamic analysis

Answer: B


NEW QUESTION # 98
Which two sources are used by Juniper Identity Management Service (JIMS) for collecting username and device IP addresses? (Choose two.)

  • A. Active Directory domain controller event logs
  • B. DNS
  • C. Microsoft Exchange Server event logs
  • D. OpenLDAP service ports

Answer: A,C

Explanation:
Explanation
Juniper Identity Management Service (JIMS) is a service that collects and maintains a large database of user, device, and group information from identity sources, enabling SRX Series Service Gateways to rapidly identify users in a large, distributed enterprise1. JIMS supports the following identity sources: Microsoft Active Directory on Windows Server 2008 R2 and later, and Microsoft Exchange Server 2010 with Service Pack 3 (SP3) and later2. JIMS collects username and device IP addresses from these sources by monitoring the event logs of the Active Directory domain controllers and the Exchange servers3. JIMS does not use DNS or OpenLDAP service ports as identity sources. References:
Juniper Identity Management Service User Guide, Introduction section
Supported Identity Sources, Juniper Identity Management Service 1.6.0 Release Notes Configure Juniper Identity Management Service to Obtain User Identity Information, Junos OS Security Configuration Guide


NEW QUESTION # 99
Your JIMS server is unable to view event logs.
Which two actions would you take to solve this issue? (Choose two.)

  • A. Enable the correct host-inbound-traffic rules on the SRX Series devices.
  • B. Enable remote event log management within Windows Firewall on the necessary Exchange servers.
  • C. Enable remote event log management within Windows Firewall on the necessary domain controllers.
  • D. Enable remote event log management within Windows Firewall on the JIMS server.

Answer: C,D

Explanation:
Explanation
JIMS server is a Windows service application that collects and maintains user, device, and group information from Active Directory domains or syslog sources. JIMS server uses the Windows event logs to obtain user login and logout information from the domain controllers and Exchange servers. Therefore, to enable JIMS server to view the event logs, you need to perform the following actions:
Enable remote event log management within Windows Firewall on the necessary domain controllers and Exchange servers. This allows JIMS server to access the event logs on these servers remotely. You can do this by using the Windows Firewall with Advanced Security snap-in or by using the netsh command.
For example, to enable remote event log management on a domain controller, you can use the following command:
netsh advfirewall firewall set rule group="Remote Event Log Management" new enable=yes Enable remote event log management within Windows Firewall on the JIMS server. This allows JIMS server to receive the event logs from the domain controllers and Exchange servers. You can do this by using the same method as above. For example, to enable remote event log management on the JIMS server, you can use the following command:
netsh advfirewall firewall set rule group="Remote Event Log Management" new enable=yes Option C and Option D show the correct actions for solving this issue. Option A and Option B are incorrect because they are not related to the JIMS server's ability to view the event logs. Host-inbound-traffic rules are used to control the traffic that is allowed to reach the SRX Series devices, not the JIMS server. Enabling remote event log management on the Exchange servers is not necessary if JIMS server does not need to collect user information from them.
References: Juniper Security, Specialist (JNCIS-SEC) Reference Materials and Juniper Security, Professional (JNCIP-SEC) Reference Materials


NEW QUESTION # 100
......

According to the research of the past exams and answers, PracticeTorrent provide you the latest Juniper JN0-335 exercises and answers, which have have a very close similarity with real exam. PracticeTorrent can promise that you can 100% pass your first time to attend Juniper Certification JN0-335 Exam.

Latest JN0-335 Exam Simulator: https://www.practicetorrent.com/JN0-335-practice-exam-torrent.html

P.S. Free & New JN0-335 dumps are available on Google Drive shared by PracticeTorrent: https://drive.google.com/open?id=1oOEhpAsesM8O-eNLlPT7XNYBRjHDT2fx

Report this page